Best chronograph watch recommend: Seiko Have A Chronograph Chronology


If you want to have a better mechanical timing clock, please see below that you can have a better choice.


When seiko watch design in Japan’s first watch timing clock, its goal is to produce a watch with a timer as much as a status symbol. Astringent to visit Seikosha, i.e., seiko factory in guangzhou to visit the city, developed a watch, it was introduced in 1964 summer Olympics. It was powered by the 12-ligne, hand-wound Caliber 5719. The salient features of this 6.1-mm-thick movement included a single button to trigger the chronograph’s functions, horizontal coupling, and a column wheel to control the start, stop and return-to-zero functions. The balance was paced at 5.5 hertz, or 39,600 vph. With the chronograph mechanism switched on, the movement would run for 38 hours. The case was made of steel and was 38.2 mm in  diameter and 11.2 mm thick.
The watch had no elapsed-time counter, so Seiko equipped it with a rotating bezel calibrated in 1-minute increments. To measure an interval longer than 1 minute, the user started the chronograph and then rotated the bezel until the tip of the large triangle was directly opposite the tip of the minutes hand. After he stopped the chronograph at the end of the interval, he read the elapsed minutes using the rotating bezel and the elapsed seconds  using the regular dial. The problem with this first chronograph series was that the bezel had a tendency to break. Seiko rectified this by replacing the fragile bezel with a sturdy, steel one.

Seiko brought another version of the movement, the movement of 6.4 mm thick, 5718, in a limited edition of steel sheet, today is extremely rare, collector is very pretty. What looks like a date window at 12 o’clock is actually a golf-stroke or point counter, operated by means of the two buttons on the left side of the case. Another special feature is a subdial at 6 o’clock that doubles as an elapsed-minutes counter and a running-seconds display. There is a tachymeter scale along the dial’s periphery.


It’s well known that Swiss companies were working feverishly in the 1960s to develop a self-winding chronograph, but no one knows whether their Japanese competitors knew about these efforts. Seiko started working on the self-winding Calibers 6139 and 6138 in 1967, even though by then much of the watch industry was focusing its attention on quartz technology. It took the company just two years to develop Caliber 6139. Remarkably small, it had a diameter of 27.4 mm and a height of 6.5 mm. Its mainspring was a ball-borne, center-mounted rotor, which worked in conjunction with Seiko’s innovative Magic Lever (still in use today), a click-winding system that can use the rotor’s kinetic energy regardless of which way the rotor turns. After being fully wound, the watch would run for 36 hours with the chronograph switched on.

To improve the rate performance, the caliber’s developers gave the balance a frequency of 3 Hz (21,600 vph), instead of the then-standard 2.5 Hz (18,000 vph). Other technical specifications included a column wheel to control the chronograph’s functions, a counter for 30 elapsed minutes at the “6,” and vertical coupling. This last feature is innovation: its obvious here for the first time earlier than the first watch in Switzerland. In addition to date display, Seiko for this model is equipped with a week of the date of bilingual (Japanese and English) indicator.
The new movement, housed in a watch called the 5 Speed-Timer, appeared in stores in mid-May of 1969. Seiko therefore won the race to bring the first automatic chronograph to market. (Two competitors, Zenith and a consortium of other Swiss companies − Breitling, Heuer, Hamilton-Buren and Dubois Dépraz – brought automatic chronographs to market later in the year.) Caliber 6138, which was 7.9-mm thick, debuted in 1970. It differed from Caliber 6139 because it had a running seconds hand and a counter for 12 elapsed hours. Seiko also incorporated Caliber 6138 into a so-called “bullhead” model, similar to Omega’s manual-wind bullhead, with pushers at the top of the case instead of on the side.
In addition, seiko can claim will be the first automatic chain timing clock to the honor of outer space. When U.S. astronaut William Reid Pogue flew aboard the Skylab-4 mission in 1973 to 1974, he wore a watch (nowadays nicknamed the “Pogue Seiko”) powered by Caliber 6139.


In 1970, Daini Seikosha, which that year became Seiko Instruments Inc. (SII), introduced the so-called “70s Series” of mechanical chronograph movements. With a thickness of just 5.9 mm, the 27.4-mm-diameter Caliber 7017 set a world record. The Magic Lever winding system, the column wheel and the vertical coupling all  recalled Caliber 6139, but the 7017 was a genuinely new movement with many special features, including a “creeping” hand to tally the elapsed minutes. Decreasing the overall number of components made the movement more compact and its servicing easier. But to achieve the movement’s record-breaking slimness, the designers had to leave out an elapsed-minutes counter. They retained digital displays for the date and day.
The equally slim Caliber 7018 debuted in 1971: it had a counter for 30 elapsed minutes. Stopwatch and seiko’s top 7015 7016 to follow in 1972. The latter two concentric rotating hand at 6 o ‘clock: a child form a seconds to run, another minutes up to 30 minutes.

Seiko discontinued production of mechanical chronograph calibers in 1977. In the early 1980s, it stopped making mechanical watches altogether. The machines used for their production were assigned to the scrap heap, but veteran employees refused to follow orders and did not destroy them. Thanks to these employees, the renaissance of mechanical watches – which had begun in Europe several years before – could commence in Japan in the mid-1990s.


In 1998, Seiko once again began to manufacture mechanical timing clock, relying on its rich experience of engineers and watchmaker, some of them have retired, but agreed to resume work. The 28.4-mm- diameter calibers in Series 6S were initially intended only for the domestic market, for which they were encased in Seiko’s prestigious Credor line. The 5.8-mm-thick, hand-wound Caliber 6S74 from 1998 had a balance paced at 4 Hz (28,800 vph) and a 60-hour power reserve. The watch had no date window but it did have a 30-minute counter, 12-hour counter and power-reserve indicator. Like its forebears, Caliber 6S74 had a column wheel. Unlike them, the connection between the gear train and the chronograph was achieved by means of a rocking pinion, not by vertical coupling.
In the recent years, seiko from this basic movement won a series of other timing clock movement. These included the 7.2-mm-thick Caliber 6S77, which debuted in 1999. It was an automatic equipped with the Magic Lever winding system. It had a date display and a 50-hour power reserve.

Another automatic, Caliber 6S78, also debuted in 1999. Caliber 6S99, the skeletonized version of Caliber 6S74, appeared on the market in 2000. It was joined in 2001 by the self-winding Caliber 6S37, which supports both a date indicator and a power-reserve display. Caliber 6S96, which was based on Caliber 6S77, had a 60-hour power reserve but no date window.
Lastly, in 2005, Seiko launched Caliber 6S28, based on the 6S78. With this movement, Seiko made the same change ETA had made with its Caliber 7750, which morphed into Caliber 7753 When it’s counter 30 minutes from the “12” move to “3”, its transformation into a movement of 7753. 6 s28 movement has a date window between “4” and “5”.

Seiko sold Caliber 6S78, which Seiko called “TC 78,” to third parties. Its customers included Junghans, which renamed the movement J890. TAG Heuer also purchased the TC 78, subjected it to major alterations, manufactured a large percentage of its components in its own factory, and rechristened it “Caliber 1887.”



In 2009, 40 years after Calibre 6139 debut, visited Seiko booth in Basel world people see a new automatic timing clock Ananta. It contained Caliber 8R28, which went into serial production in 2008. The newcomer combined traditional Seiko chronograph features such as a column wheel, vertical coupling and Magic Lever winding system with recent innovations including a three-pointed hammer that ensures all the chronograph counters return to zero simultaneously. The 8R28 has a power reserve of more than 45 hours. Seiko makes the balance, balance spring and escapement itself. The movement is 28 mm in diameter and 7.2 mm thick. It has a frequency of 4 Hz (28,800 vph) and contains 292 parts.
Caliber 8R39, launched in 2011, is 7.6 mm thick. It was designed for dive watches. Caliber 8R48, 7.5 mm thick, followed in 2014 and is used in the Brightz, which is sold only in Japan.

As an alternative to ETA’s Caliber 7753, third parties can opt for Seiko’s Caliber NE88A. Based on Caliber 8R39, it debuted in August 2014 and is 7.63 mm thick.